MSM7xx Controllers Release Notes v6.2.1.0

GetVirtualSC8021XStationIdDelimiterAndCase

◦ To configure the MAC case:

GetVirtualSC8021XStationIdDelimiterAndCasem

UpdateVirtualSC8021XStationIdDelimiterAndCasem

• When configuring Wireless protection with a Key source of Preshared Key, the station delimiter

and station ID MAC delimiter configuration fields are disabled.

• The MSM7xx Controller does not provide a NAS ID value to a customized ACL.

• (Applies to teaming.) The team manager controller can lose its default route when a static IP

address is assigned to the Internet port.

• When using sFlow, an error message regarding "kernel emergency" is incorrectly displayed and

can be ignored.

• (Applies to teaming.) When team manager controller fails over, the team member taking over

from the team manager sends SNMP traps to the IMC server.

• (Applies to MSM430, MSM460, MSM466, MSM466-R) An AP may incorrectly apply configuration

settings that were provisioned through a local mesh link.

• When the supplicant sends the RADIUS packet from a VLAN different than that of the ingress

VLAN, 802.1x authentication fails for wired clients.

• When a wireless client associates with a non-access controlled VSC, an L2 update frame is not

always sent.

• If defined hostnames in an SSL certificate contain uppercase letters, the wireless client does not

display the Welcome HTML page.

• The MSM controller uptime value in the management tool is different from the value retrieved

using IMC.

• The following missing SOAP commands for handling VSC ID and Station ID MAC delimiters have

been added:

◦ soapUpdateVirtualSCMACBasedStationIdDelimiterAndCase ($vscName,$stationIdDelimiter,

$stationIdMACCase)

◦ soapGetVirtualSCMACBasedStationIdDelimiterAndCase($vscName)

• The MSM7xx Controller does not apply a bandwidth restriction to wireless clients that are

connected through a third-party AP.

• (Applies to teaming.) If you are setting up a team with Russia selected as the location, the team

member controllers can fail to synchronize to the team manager controller.

• When the "restrict 802.11n clients" option is enabled, wireless clients on the 5 GHz band are

unable to reach other clients.

• (Applies to teaming.) APs failed to find the team member controllers when using DNS discovery.

• The CLI command, ids ap <MAC ADDR> authorize fails with the following error message:

ERROR: Unable to create the IDS Neighborhood

• When Radio Resource Management is enabled, some APs might reject configuration settings from

the controller and cause the controller to reboot.

• Mobility Traffic Manager clients get disconnected when roaming from one AP to another.

• Internet port bandwidth control does not limit download (controller to client) bandwidth.

• The MSM7xx Controller does not apply the VSC rate limit settings received from an external

RADIUS server.

Fixes 9