MSM7xx Controllers Configuration Guide v6.4.0

Creating a new VSC
To add a VSC, select Controller > VSCs >>VSC Profiles > Add New VSC Profile.
Define VSC parameters and select Save. Familiarize yourself with sections of interest in “VSC
configuration options” (page 113). See the online help for parameter descriptions.
Assigning a VSC to a group
When working with controlled APs, VSC definitions must be bound to a group so that they will
automatically be activated on the APs in the group. For information on how to bind (assign) a VSC
to a group, see “Binding a VSC to a group” (page 165).
On an HP 517 or MSM317, VSCs can also be bound to a switch port. See the HP 517 802.11ac
Unified Walljack Configuration Guide and the MSM317 Access Device Installation and
Configuration Guide.
NOTE: When working with autonomous APs, the VSC definition you create on the controller
must be manually configured on each autonomous AP. See “Working with autonomous APs”
(page 533) and the MSM3xx/MSM4xx Access Points Configuration Guide.
144 Working with VSCs