MSM7xx Controllers Configuration Guide v6.4.0

4. As each synchronization completes, the Status light icon and background color of the
synchronized AP changes to green. The status light icon next to the AP name under the pertinent
group name in the Network Tree also changes to green. This indicates that the AP is fully
operational and using its new configuration.
Assigning egress VLANs to a group
When you bind an AP to a VSC, you are able to assign an egress network to the binding. The
egress network can be used to assign all the traffic on the group to a specific VLAN. Other uses
are also possible depending on the type of VSC to which the group is being bound. For more
information, see “Traffic flow for wireless users” (page 221).
Assigning country settings to a group
The country of operation, also known as the regulatory domain, determines the availability of
certain wireless settings on an AP. The country of operation is configured at the group level.
To configure country settings, select either:
Controlled APs >> Configuration > Country
Controlled APs > [group ] >> Configuration > Country
The country configuration for the Base group looks like this:
170 Working with controlled APs