MSM7xx Controllers Configuration Guide v6.4.0

by other devices on your network), you need to create special network detector VLAN
assignments as follows:
4. To detect rogue APs, IDS needs connectivity to all VLANs in use by the network. By default,
APs monitor the network on which the management tunnel with the controller is established.
If your network has other VLANs, it requires that you define one or more APs with network
detector capabilities as follows:
a. Select Controlled APs >> Security > Network detector.
b. Enable this option to have IDS retrieve information from the network detector feature on
the APs. If you select an individual AP in the Network Tree, you can define the VLAN on
which the network detector will operate.
c. Click Add New VLAN.
d. Click Save when done.
Starting IDS 201