MSM7xx Controllers Configuration Guide v6.4.0

AP information
• BSSIDs: MAC addresses of the AP. Click the address to see detailed information about the
AP.
• SSIDs: SSIDs on which the AP is broadcasting.
• Channels: Channels on which the AP is operating.
• Classification: Rogue.
• Manual override: Indicates if the AP was classified manually by the administrator or
automatically by the controller.
• Info: Encryption being used.
• Last seen: Date and time the AP was last detected.
• Security: Type of security active on the AP.
• Authentication: Authentication method.
• HT compatibility: Indicates the APs high-throughput capability.
• Detection timestamp: Date and time the AP was first detected.
• Network connectivity: IP address and mask.
Detected by
• AP: MAC address of the AP that detected the radio.
• Signal strength: Indicates the strength of the radio signal received from the AP. Signal strength
is expressed in decibel milliwatt (dBm). The higher the number the stronger the signal.
208 Intrusion detection system (IDS)