MSM7xx Controllers Configuration Guide v6.4.0

5. Enable Event notifications and/or Alarm notifications, and select the notifications that you
want to send for each.
6. Select Save. You are returned to he SNMP agent configuration page.
7. In the Notifications receivers box, select Add New Receiver. The Add/Edit SNMP notifications
receiver page opens.
8. Define the settings for the receiver as follows:
• Host: Specify the domain name or IP address of the SNMP notifications receiver to which
the controller will send notifications.
• UDP port: Specify the port on which notifications will be sent.
• SNMP version: Select the SNMP version (v1, v2c, v3) for this receiver.
• Community: For SNMP v1 and v2c, specify the SNMP community name of the receiver.
For SNMP v3, select the SNMP v3 username of the receiver.
9. Select Save.
Configuring SNMP notifications for events and alarms 217