MSM7xx Controllers Configuration Guide v6.4.0

1.11
AP 1
W
L
A
N
1.21
192.168.1.0
Controller 1
1.12
1.13
AP 2
W
L
A
N
1.22
AP 3
W
L
A
N
1.23
AP 4
W
L
A
N
1.24
Team Manager
Controller 2
Team Member
Controller 3
Team Member
DHCP server
on subnet
1.1
Controlled APs
Team IP= 1.99
1.10
Management station
The controllers are connected to the network (192.168.1.0) via their LAN ports. Static addressing
is used on each port.
Configure connectivity and licenses on each controller
Use the management station to connect to each controller in turn and do the following:
1. Select Controller >> Maintenance > Licenses. Install the Premium license and any required AP
licenses. For information on how to install licenses, see “Managing licenses” (page 541).
2. Select Controller >> Network > IP interfaces.
3. Select LAN port. Set the static IP address as shown in the diagram.
Configure the team
On controller 2 and controller 3, do the following:
1. Select Controller >> Management > Teaming.
2. Select the Controller teaming checkbox.
3. Under Control channel, set Establish control channel on to LAN port.
4. Select No VLAN.
5. Select Save.
Creating a team 251