MSM7xx Controllers Configuration Guide v6.4.0

This address must be on a different subnet than the IP address assigned under Connectivity.
However, it can be on the same subnet as the selected interface.
• Set Mask to 255.255.255.0.
• Set Interface to Access network. This makes the Team IP address available on port 1.
5. Select Save.
6. Controller 2 will now attempt to discover the manager. Monitor the Summary box until you
see an Unauthorized controller in the list.
Indicates team manager is synchronized.
Indicates team manager and a new controller were detected.
Indicates team manager is configured.
Indicates new controller has been discovered.
7. Under Network Tree, select Controllers to view more detailed information about the discovery
process. The two new controllers should be listed in red. Select Authorize in the Action column
for the controller.
260 Controller teaming