MSM7xx Controllers Configuration Guide v6.4.0

The following table lists the configuration options that are affected when teaming is active.
NotesConfiguration option
IP addresses cannot be assigned at the team level.Network > IP interfaces
The DHCP server option is not supported when teaming is enabled.Network > Address allocation
The VPN address pool option is not supported when teaming is enabled.
Not available at the team level.Security > Certificate stores
Not available at the team level.Security > Certificate usage
Not available at the team level.VPN > IPSec
Not supported when teaming is enabled.VPN > L2TP server
Not supported when teaming is enabled.VPN > PPTP server
Not supported when teaming is enabled.VPN > PPTP client
The General and Join options are not available at the team level.Authentication > Active Directory
The Site file archive, FTP server, and Current site files options are not available
at the team level.
Public Access > Web content
Public Access > Attributes
New attributes cannot be added to the Configured attributes table at the team
level.
Feature not supported when teaming is enabled.Users > Subscription plans
Feature not supported when teaming is enabled.Users > Accounting persistence
Not available at the team level.Management > Teaming
Not available at the team level.Status
Not available at the team level.Tools > IPSec
Not available at the team level.Tools > System tools
Not available at the team level.Tools > Network trace
Not supported when teaming is enabled.Tools > sFlow
Not available at the team level.Maintenance > Registration
Not available at the team level.Maintenance > Licenses
Removing a controller from a team
To remove a controller from a team, do the following:
Remove the controller from the team
1. Under Controllers, select a team member.
2. In the right pane, select Device management.
268 Controller teaming