MSM7xx Controllers Configuration Guide v6.4.0

To view this page:
• On a non-teamed controller, select Controller >> Status > Mobility.
• On a controller team, select Team:[Team-name] > Controllers [Team-manager] >> Status >
Mobility.
Controllers
This table lists all controllers that are part of the mobility domain.
• Name: Name assigned to the controller.
• IP address: IP address of the controller.
• MAC address: Medium access control address of the associated controller.
Networks in the mobility domain
This table lists all networks that are defined in the mobility domain and indicates the address of
the Handler (AP or controller) that provides the data path to each network.
This list should be identical on all controllers that are part of the mobility domain. The handler will
differ on each controller, depending on whether the network is supported locally or not.
IP subnet
(This field does not apply when using Mobility Traffic Manager.)
IP subnet assigned to the network, if applicable. For example, if the network is a VLAN, then
no IP subnet/mask information is shown.
Mask
Network mask associated with the IP subnet, if applicable.
VLAN ID
VLAN ID associated with the network.
296 Mobility traffic manager