MSM7xx Controllers Configuration Guide v6.4.0

Network profiles
Define a network profile with a VLAN ID of 40.
1. Select Controller >> Network > Network profiles.
2. Select Add New Profile.
3. Under Settings, set Name to All-Traffic.
4. Select the VLAN ID checkbox, and specify a value of 40.
5. Select Save.
Map the profile to a port
Map the profile to the Internet port.
1. Select Controller >> Network > VLANs.
2. Select All-Traffic in the table. The Add/Edit VLAN mapping page opens.
Scenario 2: Centralized traffic on a controller with VLAN egress 303