MSM7xx Controllers Configuration Guide v6.4.0

1. Select Controller >> VSCs > HP.
• Under Global, clear Access control.
(For a complete screenshot of this page, see “VSC configuration options” (page 113).)
• Select Wireless mobility, then under it:
• Select Mobility traffic manager.
• Select Block user.
• Select Wireless protection, and then select WPA. Under it, do the following:
• Set Mode to WPA (TKIP).
• Set Key source to Dynamic.
This will automatically enable the 802.1X authentication option and set it to use the local
user accounts.
2. Select Save.
Network profiles
Define network profiles that with VLAN IDs of 30 and 40.
306 Mobility traffic manager