MSM7xx Controllers Configuration Guide v6.4.0

2. Select Network 3 and Network 4 in the list.
3. For Select the action to apply to the selected network profiles, select Add New Mapping, then
select Apply. The Add/Edit VLAN mapping page opens.
4. Under Map To, select Internet port.
5. Select Save. The VLANs page opens showing the profiles mapped to the Internet port.
User accounts
Next you need to define user accounts and account profiles.
1. Select Controller >> Users > Account profiles.
2. Select Add New Profile.
3. Under General, set Profile name to Network 3 and disable Access-controlled profile.
4. Select Egress interface, and under it select Egress VLAN ID and set it to 30.
308 Mobility traffic manager