MSM7xx Controllers Configuration Guide v6.4.0

16. Under General:
• Set User name to User B.
• Set Password to a secure password.
• Clear Access-controlled account.
17. Select Account profiles, and under it move Network 4 to the box titled Set account attributes
using these profiles.
18. Select Save.
VSC binding
This scenario assumes that all APs are part of the Default Group.
1. Select Controlled APs > Default Group >> VSC bindings and then select HP. The VSC binding
page appears.
• Under VSC Profile, set VSC profile to HP.
2. Select Save.
Scenario 3: Centralized traffic on a controller with per-user traffic routing 311