MSM7xx Controllers Configuration Guide v6.4.0

AP configuration
VSC binding
1. Select Controller > Controlled APs > Default Group >> VSC bindings and then select HP. The
VSC binding page appears.
(For complete screenshot see “VSC configuration options” (page 113).)
• Set VSC profile to HP.
2. Select Save.
Local network assignment
1. Select Controlled APs > Default group >> Configuration > Home networks.
• For each AP on network 1, double-click Net1 to add it to the Local networks list.
• For each AP on network 2, double-click Net2 to add it to the Local networks list.
2. Select Save.
Scenario 5: Traffic routing using VLANs
This scenario explains how to route the traffic from users onto specific VLANs on the wired network.
How it works
In this scenario, traffic on a corporate network is routed using VLANs, creating several logical
networks to isolate the network resources for each workgroup. A number of wireless APs are
distributed throughout the company and are connected using VLAN 2. Network administrators use
VLAN 1 for all equipment installed on the network and in the network operations center (NOC).
316 Mobility traffic manager