MSM7xx Controllers Configuration Guide v6.4.0

4. Select Save. The list of VLANs should look like this:
Controller 2 configuration
Mobility domain
1. Select Controller >> Management > Device discovery.
(For complete screenshot see “Defining the mobility domain” (page 291).)
• Select Mobility controller discovery.
• Clear This is the primary mobility controller.
• Set the IP address of the primary mobility controller to 192.168.5.2.
2. Select Save.
VSC
Configuration is the same as for controller 1.
Network profiles
1. Select Controller >> Network > Network profiles.
2. Select Add New Profile.
Scenario 5: Traffic routing using VLANs 321