MSM7xx Controllers Configuration Guide v6.4.0

3. Select Save.
VLANs
1. Select Controller >> Network > VLANs.
2. Select Net1. The Add/Edit VLAN mapping page opens.
• Under Map to, set Port to LAN port.
3. Select Save.
Controller 2 configuration
Mobility domain
1. Select Controller >> Management > Device discovery.
(For complete screenshot see “Defining the mobility domain” (page 291).)
• Select Mobility controller discovery.
• Clear This is the primary mobility controller.
• Set the IP address of the primary mobility controller to 192.168.5.2.
2. Select Save.
Scenario 6: Distributing traffic using VLAN ranges 327