MSM7xx Controllers Configuration Guide v6.4.0

3. Specify a name for the profile and assign a VLAN ID to it. This example uses the profile name
Network A and a VLAN ID of 25. Select Save.
4. Select Controller >> Network > VLANs to open the VLANs page.
5. Select the new profile in the table to open the Add/Edit VLAN mapping page.
6. Select the port to which you want to map the profile (in this case the LAN port).
7. Select Save. The profile is mapped to the LAN port tagged.
8. Select Controller >> Network > IP interfaces to open the IPv4 interfaces page.
Configuring IP interfaces 37