MSM7xx Controllers Configuration Guide v6.4.0

• Alternate Master: An alternate master node must first establish an upstream link with a master
or alternate master node before it can establish downstream connections with an alternate
master or slave node.
Security
Enable this option to secure data transmitted on the wireless link. The APs on both sides of the
wireless link must be configured with the same security options.
WEP
This feature has been deprecated. If you are creating a new installation, use AES/CCMP. If
you are upgrading from a previous release, your existing configuration will still work.
Enables WEP to secure traffic on the wireless link.
Specify the encryption key the node will use to encrypt/decrypt all data it sends and receives.
The key is 128 bits long and must be specified as 26 hexadecimal digits.
TKIP
This feature has been deprecated. If you are creating a new installation, use AES/CCMP instead.
If you are upgrading from a previous release, your existing configuration will still work.
Enables TKIP encryption to secure traffic on the wireless link.
The node uses the key you specify in the PSK field to generate the TKIP keys that encrypt the
wireless data stream.
Specify a key that is between 8 and 63 ASCII characters in length. HP recommends that the
key be at least 20 characters long, and be a mix of letters and numbers.
Local mesh profiles 389