MSM7xx Controllers Configuration Guide v6.4.0

Static addressing
Under Port settings, define the following:
• IP address: Specify the static IP address you want to assign to the port.
• Address mask: Specify the appropriate mask for the IP address you specified.
• Default gateway: Specify the address of the default gateway on the network.
Additional IP addresses
You need to configure these settings if you are making use of the VPN one-to-one NAT feature or
the public IP address feature. For more information see:
• “VPN one-to-one NAT” (page 515)
• “Assigning public IP addresses” (page 47)
Configuring port settings
To configure settings for the physical ports on the controller, select Controller >> Network > Ports.
On the MSM720
On all other controllers
Status light
• Green: Port is properly configured and ready to send and receive data.
• Red: Port is not properly configured or is disabled.
42 Network configuration