MSM7xx Controllers Configuration Guide v6.4.0

3. Once you select a Name, information appears regarding the correct syntax to specify under
Value. Use the correct syntax to specify the desired Value.
For a complete list of all supported site attributes and their syntax, see “Colubris AV-Pair - Site
attribute values” (page 458), or consult the online help.
4. Select Add.
Controller attribute definitions
The following table lists all RADIUS attributes supported by the controller. A brief description of
each attribute follows the table. For detailed information, refer to RFC2865, or the documentation
that came with your RADIUS server.
Access AcceptAccess Request
• Class• Acct-Session-Id
• Called-Station-Id • EAP-Message
• Session-Timeout• Calling-Station-Id
• Vendor-specific
(Colubris)
◦ Colubris AV-Pair
• CHAP-Challenge
• CHAP-Password
• Connect-Info
Access Reject
• EAP-Message
• Framed-IP-Address
No attributes are
supported.
• Framed-MTU
Access Challenge
• NAS-Identifier
No attributes are
supported.
• NAS-Ip-Address
• NAS-Port
Accounting Request
• NAS-Port-Type
• Acct-Authentic
• Message-Authenticator
• Acct-Delay-Time
• Service-Type
• Acct-Event-Timestamp
• State
• Acct-Session-Id
• User-Name
• Acct-Status-Type
• User-Password
• Called-Station-Id
438 Working with RADIUS attributes