MSM7xx Controllers Configuration Guide v6.4.0

Retrieving attributes from a RADIUS server
When you are using a RADIUS server to authenticate users, attributes can be set in individual user
accounts to define the same settings that are available via the local user profiles. These settings
are accomplished by adding both standard RADIUS attributes (“User attribute definitions” (page
448)) and one or more instances of the Colubris AV-Pair (user) attribute (“Colubris AV-Pair - User
attribute values” (page 484)) to the appropriate RADIUS user accounts.
PCM IDM support
PCM is a network management solution for managing HP devices. HP Identity Driven Manager
(IDM) is a plug-in to PCM Plus that enables dynamic provisioning of network security and
performance settings based on user, device, location, time, and endpoint posture.
IDM can be used to define settings in a users RADIUS account that the controller will retrieve when
the user is authenticated, and then apply to the users wireless session. The following PCM settings
are supported.
Supported on VSCs that are ...DescriptionPCM setting
Access controlled andSpecifies a VLAN number only.
Names are not supported.
Tagged VLAN
(The Untagged VLAN setting is not
supported.)
Non-access-controlled
Access controlled and
Non-access-controlled
Sets the bandwidth level for the users
account. PCM numerical values are
QoS
User attributes 447