MSM7xx Controllers Configuration Guide v6.4.0

Connect-Info
(string)
The string "HTTPS" or "IEEE802.1X".
EAP-Message
(string)
As defined in RFC 2869. Only present when the authentication method for the RADIUS profile
is set to EAP-MD5.
Framed-IP-Address
(32-bit unsigned integer)
IP Address as configured on the client station (if known by the controller).
Framed-MTU
(32-bit unsigned integer)
Hard-coded value of 1496. The value is always four bytes lower than the wireless MTU maximum
which is 1500 bytes in order to support IEEE802dot1x authentication.
NAS-Identifier
(string)
The NAS ID set on the Controller >> Authentication > RADIUS profiles > Add New Profile page
for the RADIUS profile being used.
NAS-Ip-Address
(32-bit unsigned integer)
The IP address of the port the controller is using to communicate with the RADIUS server.
NAS-Port
(32-bit unsigned integer)
A port number, other than 0.
NAS-Port-Type
(32-bit unsigned integer)
Always set to 19, which represents WIRELESS_802_11.
Message-Authenticator
(string)
As defined in RFC 2869. Always present even when not doing an EAP authentication. length
= 16 bytes.
Service-Type
(32-bit unsigned integer)
RADIUS service type.
State
(string)
As defined in RFC 2865.
User-Name
(string)
The username assigned to the user or a device when using MAC authentication.
User-Password
(string)
The password supplied by a user or device when logging in. Encoded as defined in RFC 2865.
Only present when the authentication method for the RADIUS profile is set to PAP.
450 Working with RADIUS attributes