MSM7xx Controllers Configuration Guide v6.4.0

access-list=faculty,ACCEPT,all,all.all,faculty_internet_use,5000
Enables all other traffic to reach the Internet (via routers on the backbone LAN and the router in
the NOC). If this last rule did not exist, this traffic would be dropped.
Configuration file
The controller can retrieve and load a new configuration file automatically, based on the URL you
specify.
Syntax
configuration-file=URL [placeholder ]
Where:
DescriptionParameter
Specify the URL that points to the new configuration file.URL
By using the following placeholders, you can customize the URL for each controller. This is useful
when you need to update multiple units.
DescriptionPlaceholder
Returns the NAS ID assigned to the controller. By
default, this is the unit serial number.
%n
Returns the RADIUS login name assigned to the
controller on the Public access > Attributes page. By
default, this is the unit serial number.
%s
Returns the domain name assigned to the controller
Internet port.
%i
Returns the IP address of the controller Internet port.%a
Custom SSL certificate
The controller can retrieve a custom SSL security certificate to replace the HP ProCurve certificate
that is included by default.
Syntax
ssl-certificate=URL [placeholder ]
Where:
DescriptionParameter
Specify the URL that points to the new certificate.URL
By using the following placeholders, you can customize the URL for each controller. This is useful
when you need to update multiple units.
DescriptionPlaceholder
Returns the NAS ID assigned to the controller. By default, this is its serial
number.
%n
Returns the RADIUS login name assigned to the controller. By default, this
is its serial number.
%s
Colubris AV-Pair - Site attribute values 467