MSM7xx Controllers Configuration Guide v6.4.0

DescriptionPlaceholder
Returns the domain name assigned to the controller Internet port.%i
Returns the IP address of the controller Internet port.%a
The certificate is encoded using PKCS#12 format, and contains:
the private key of the Web server
the certificate of the Web server
The file is locked using a password.
NOTE: The password with which the certificate was locked must be the same as the password
specified on the Public access > Attributes page. This is the password the controller uses to login
to the RADIUS server.
Example
ssl-certificate=http://www.mycompany.com/%s_certificate
Custom public access interface Web pages
Several options are available to define custom pages.
Loading custom pages from an archive
This option enables you load site files from an external file archive, allowing you to replace
the entire public access Web site in one simple operation. The archive must be in .zip format.
NOTE: The contents of the existing public access site is deleted and replaced by the contents
of the archive (.zip) file. If the archive does not contain a complete set of valid pages, the
public access interface will not function correctly.
NOTE: When unzipped the total size of all files must be less than 1 MB.
Syntax
custom-pages= ArchiveURL
Where:
DescriptionParameter
URL of the .zip archive to be loaded.ArchiveURL
Loading individual pages
These keywords have been deprecated
. If you are creating a new installation, use the
custom-pages keyword or the site file archive feature on the
Controller >> Public access > Web
content
page. If you are upgrading from a previous release, your existing configuration will
still work.
Use the following values to retrieve pages from an external location and load them onto the
controller. For descriptions of the individual pages, see “Current site files (page 414).
NOTE: The maximum length of any page URL is 512 characters. If this is exceeded (when
using placeholders for example), the URL is truncated. Therefore, HP recommends that you
specify the most-important placeholders first.
The pages can only be changed as a group. You cannot, for example, just specify the login-page
value. You must specify all of the following pages:.
Login page
login-page=URL_of_page [placeholder ]
468 Working with RADIUS attributes