MSM7xx Controllers Configuration Guide v6.4.0

Default user bandwidth level
This keyword lets you define the bandwidth level for all users that do not have a specific level set
in their profile.
Syntax
bandwidth-level=level
Where:
DescriptionParameter
Specify one of the following the bandwidth levels for the users session.
The actual data rate associated with a bandwidth level is defined on the
Network > Bandwidth control page.
level
VERY-HIGH
HIGH
NORMAL
LOW
Default user idle timeout
Use this to set the default idle timeout for all users whose RADIUS profile does not contain a value
for the RADIUS attribute idle-timeout.
Syntax
default-user-idle-timeout=seconds
Where:
DescriptionParameter
Specify the maximum amount of time a user session can be idle. Once
this time expires, the session is automatically terminated. A value of 0
means no timeout.
seconds
Default user quotas
These keywords let you define upload and download limits for all users that do not have a specific
limit set in their profile. Limits can be defined in terms of packets or octets (bytes).
Syntax
default-user-max-input-packets=value
default-user-max-output-packets=value
default-user-max-total-packets=value
default-user-max-input-octets=value
default-user-max-output-octets=value
default-user-max-total-octets=value
default-user-max-input-rate=value
default-user-max-output-rate=value
Where:
DescriptionParameter
For packets: 32-bit unsigned integer value.value
For octets: 64-bit unsigned integer value.
Colubris AV-Pair - Site attribute values 473