MSM7xx Controllers Configuration Guide v6.4.0
DescriptionTLV name
• Power priority
• Power value
Indicates the following:MAC/PHY Configuration/Status
• Bit-rate and duplex capability
• Current duplex and bit-rating
• Whether these settings were the result of auto-negotiation during link
initiation or manual override
ELIN location
Emergency Call Services ELIN as described, for example, by NENA TID 07-501.
Fast Start timer
After an MED LLDPDU is received, this timer is started and the agent sends one MED LLDPDU
to the MED device each second.
LLDP settings
Transmit interval
Sets the interval (in seconds) at which local LLDP information is updated and TLVs are sent to
neighboring network devices.
Multiplier
The value of Multiplier is multiplied by the Transmit interval to define Time to live.
Time to live
Indicates the length of time that neighbors will consider LLDP information sent by this agent to
be valid. Time to live is calculated by multiplying Transmit interval by Multiplier.
Port Description TLV content
Select the content to be included in and advertised as part of the port description TLV.
• Interface friendly name: Use the friendly name for the interface (the name you see in the
management tool). For example: LAN port, Internet port.
• Interface internal name: Use the internal name for the interface. For example: eth0, eth1.
System name TLV content
Access point name
Use the name assigned to the AP as shown in the network tree. To change the name, select
the AP in the network tree, and then select Device Management > AP management.
Dynamic Name
When the Generate dynamic system names option is enabled on the Controllers >> Network
> Discovery protocols page, the system name of the AP will be replaced with a dynamically
generated name that you define.
Specify how the dynamically generated name will be created. You can use regular text in
combination with placeholders to create the name. Placeholders are automatically expanded
each time the name is regenerated.
If the placeholders cause the generated name to exceed 32 characters, it is truncated.
IMPORTANT: Once a system name is dynamically changed by this feature, there is no way
to automatically return to the original system name.
524 LLDP