MSM7xx Controllers Configuration Guide v6.4.0

NOTE: Display of the Session page (and other pages that are part of the public access interface)
may not work for all users. These pages will fail if the initial traffic from the users computer is sent
by an application other than the users browser. For example: messaging software, automatic
software update services, e-mail applications.
Identify stations based on IP address only
This option only applies when the HTML-based user logins option is enabled.
This option controls how client stations are identified once they are logged in.
• When enabled, the controller identifies client stations by their IP address only. This setting
provides support for network configurations where the MAC address of wireless stations is
not visible to the controller, or for configurations where the MAC address changes when a
client station roams.
• When disabled (default setting), the controller identifies client stations by both IP address and
MAC address. Both addresses must remain the same after login for the client station to remain
authenticated.
Local NAS ID
Defines a NAS ID for this profile. This ID is used only when RADIUS authentication is not configured
for the profile.
Virtual AP
The virtual AP settings define the characteristics of the wireless network created by the VSC,
including its name, the number of clients supported, and QoS settings.
Access control disabledAccess control enabled
Select the Virtual AP checkbox to enable the wireless network defined by this VSC.
VSC configuration options 117