MSM7xx Controllers Configuration Guide v6.4.0

Default user data rates
These options enable you to set the default data rates for authenticated users that do not have a
data rate set in their RADIUS accounts, and for unauthenticated users. For details on setting user
data rates using RADIUS attributes, see “Public/guest network access” (page 396) and “Working
with RADIUS attributes” (page 435).
Settings
Max transmit
Specify the maximum rate (in kbps) at which users can send data.
Max receive
Specify the maximum rate (in kbps) at which users can receive data.
NOTE: The Data rate limits defined on the Controller >> Network > Bandwidth control page
always take precedence over user data rates set in the VSC. This means if you set a data rate
which exceeds the configured bandwidth for the port, the rate will be capped.
Wireless mobility
The wireless mobility feature provides for seamless roaming of wireless users, while at the same
time giving you complete control over how wireless user traffic is distributed onto the wired
networking infrastructure. This enables you to implement a wireless networking solution that is
perfectly tailored to meet the needs of your users and the topology of your network.
For detailed information on how to use and configure this feature, see “Mobility traffic manager”
(page 285).
To use wireless mobility, you must:
• Disable the Access control option under Global.
• Install a Mobility or Premium license on the controller.
124 Working with VSCs