MSM7xx Controllers Configuration Guide v6.4.0

1. Use the check boxes in the table to select one or more APs. Select the check box in the table
header to select all the APs in the table.
2. Select the group into which to move the APs from the list next to Move selected APs to group.
3. Select Apply.
Synchronizing APs
Depending on the type of configuration changes that are being synchronized, wireless users may
be forced to reassociate or log in again.
After making configuration changes, you must synchronize the APs with the updated configuration
as follows:
1. In the Network Tree, select the group that contains the APs, and then in the right pane, select
Discovered APs. For example, Secondary Group.
APs requiring synchronization are displayed with an orange background and show
Unsynchronized in the Diagnostic column.
2. Select a Synch link in the Action column to synchronize a single AP.
Or, to synchronize all unsynchronized APs in the group, select Synchronize Configuration in
the Select the action to apply to all listed APs list, and select Apply.
3. Monitor synchronization progress by watching the Diagnostic column. Messages such as
Resetting configuration and Restoring configuration will appear during the synchronization
process.
Configuring APs 169