MSM7xx Controllers Configuration Guide v6.4.0

Defining a VLAN
Defining a VLAN on a controller port
Define a VLAN on a controller port as follows:
1. Define a network profile with the required VLAN as described under “To define a new network
profile” (page 33) This example uses a new network profile called Guest, assigned to VLAN
100.
2. Select Controller >> Network > VLANs.
On the MSM720
On all other controllers
3. Select the network profile you defined in step 1 (Guest). This opens the Add/Edit VLAN
mapping page.
On the MSM720
Defining a VLAN 219