MSM7xx Controllers Configuration Guide v6.4.0

On all other controllers
Allowed addresses
Enables you to define a list of IP address from which to permit access to the management tool.
To add an entry, specify the IP address and appropriate mask and select Add. When the list
is empty, access is permitted from any IP address. For example: To allow access for a single
computer with IP address 192.168.1.209, specify:
IP address = 192.168.1.209
Mask = 255.255.255.255
To allow access for several computers in the IP address range 192.168.10.16 to
192.168.10.31, specify:
IP address = 192.168.10.16
Mask = 255.255.255.240
Active interfaces
Select the interfaces through which access to the management tool will be permitted. (These
settings also apply when SSH is used to access the command line interface.)
Configuring the Login page message
You can customize the message that is displayed at the top of the login page by selecting Controller
>> Management > Management tool and entering a new message under Login message.
22 Using the management tool