MSM7xx Controllers Configuration Guide v6.4.0

LEDs
On an MSM720 you can select Controller >> Tools > LEDs to control operation of the status lights.
Until fully operational, status lights follow their normal behavior. This allows potential error conditions
to be diagnosed.
Power saving
Select the behavior of all LEDs on the chassis LEDs.
• On: All LEDs are off.
• Off: All LEDs are on.
Identify chassis
Use this feature to help you physically identify a particular controller in your installation.
LED pattern
Select the state of the Locator LED on the front of the MSM720 chassis.
Off: Turn the Locator LED off. Default state.
On: Turn the Locator LED on.
Blinking: Turn the Locator LED on and make it blink.
Display for
Specify how many minutes the On or Blinking LED pattern is active. Once this time expires the
LED returns to the Off state.
24 Using the management tool