MSM7xx Controllers Configuration Guide v6.4.0

1. Select Controller >> Network > Bonjour. The Bonjour configuration page opens.
2. Enable and configure the gateway described in the section “Configuring Bonjour gateway”
(page 234). Traffic filtering cannot be enabled without first activating Bonjour gateway.
3. Enable and configure traffic management described in the section “Configuring traffic
management” (page 237). Traffic filtering cannot be enabled without first activating traffic
management.
4. In the Traffic filtering box, enable traffic filtering as follows:
• All access-controlled VSCs and user profiles: Select this option to enable traffic filtering
on all access-controlled VSCs that are defined on the controller and bound to any APs,
and for all access-controlled user profiles. Traffic filtering cannot be selectively enabled
on individual APs or AP groups. It is either on for all access-controlled VSCs or off. (Bonjour
filter profiles are not supported at the AP level on access-controlled VSCs.)
• All non-access-controlled VSCs on the APs in the group: Select the AP group on which
you want to enable traffic filtering and then select Apply. To enable traffic filtering on
more than one group, select each group in turn and select Apply.
If you want to enable traffic filtering for an individual AP, select Controlled APs in the
Network Tree, select the AP, and then select Configuration > Bonjour.
5. Select Save.
240 Managing Bonjour traffic