MSM7xx Controllers Configuration Guide v6.4.0

8. Under Network Tree, select Controllers to view more detailed information about the discovery
process. The two new controllers should be listed in red. Select Authorize in the Action column
for each controller.
9. The manager will now attempt to authorize and synchronize controllers 2 and 3. Once
synchronized, their status will change to green.
For more information on summary states and the Network Tree, see “Monitoring the discovery
process” (page 262).
Once all members are synchronized, the team is ready for further configuration. See “Team
configuration” (page 267) for details.
Teaming two MSM720s using a dedicated port
The easiest and best way to create a team with two MSM720s is to use a dedicated port on each
device to provide the connection on which to establish the team control channel. The dedicated
port is for teaming use only, and cannot be a member of a trunk or be used to carry other VLANs.
This example connects two controllers using port 1 and summarizes the configuration settings on
each controller. The steps that follow illustrate how to define the required configuration settings on
each controller.
Creating a team 253