MSM7xx Controllers Configuration Guide v6.4.0

Settings

Team: team name

Select Team: [name ] to access configuration items that apply to all members of the team and

their controlled APs. Configure these options using the main menu in the right pane.

VSC

Select the VSCs node to manage the virtual service communities that are defined on the team.

Once you define a VSC it is automatically synchronized on all member controllers, and can

be assigned (bound) to one or more controlled APs.

Status lights

A status is light is displayed for each VSC.

• Green: Indicates that the VSC is properly configured.

• Red: Indicates that the VSC has a configuration problem.

Once you define a VSC it is automatically active on the controller.

Controllers

This section lists all controllers that are members of the team. Team members are controllers

that fall into one of the following categories:

• The controller was discovered on the network, authorized by an administrator, and

successfully joined the team at least once.

• The controller was manually added to the team by selecting Add New Controller on the

Overview > Configured controllers page.

Each controller is identified by a name (which is initially set to the controllers serial number for

discovered controllers). Select a controllers name to access configuration items that are specific

to the controller. These configuration items are presented in the main menu in the right pane.

Status lights

Controllers that are part of the team are listed under Controllers in the Network Tree. The status

lights provide an indication of their state as follows:

• Green: The controller has joined the team and its configuration is synchronized with the

settings defined on the team manager. It is fully operational.

• Red: The controller is not functioning normally. Select Overview > Discovered controllers

and refer to the Diagnostic column for details.

• Grey flashing: An action is pending. Select Overview > Discovered controllers and refer

to the Action column for details.

• Grey solid:: The controller is configured as a member of the team, but is currently not

active.

264 Controller teaming