MSM7xx Controllers Configuration Guide v6.4.0

The tab title displays the following information:

• Current: Indicates the total number of wireless clients that are currently connected.

• Peak: Indicates the maximum number of wireless clients that were connected during the last

24 hours.

• Avg: Indicates the average number of wireless clients that were connected during the last 24

hours.

The information shown in the first box depends on the option you select in the drop-down menu

on the right side of the title bar. The following options are available: VSC, Band, Wireless Mode,

and Signal Quality.

VSC

Select VSC to see information about wireless clients connected to VSCs. (This is the default

selection.)

VSCs with Most Wireless Clients - Current

Displays the number of wireless clients currently connected to each VSC. Only the ten VSCs

with the most connected wireless clients are shown.

Wireless Clients per VSC - Last 24 Hours

Displays the four VSCs with the highest average number of connected wireless clients per hour

over the last 24 hours. The entry labeled Other displays the average number of connected

wireless clients over the last 24 hours for all other VSCs.

Band

Select Band to see the number of wireless clients connected to each transmission band.

Wireless Clients per Band - Current

Displays the number of currently connected wireless clients in each band: 5 GHz and 2.4

GHz.

Wireless Clients per Band - Last 24 Hours

Displays the average number of connected wireless clients per hour over the last 24 hours in

each band: 5 GHz and 2.4 GHz.

Wireless Mode

Select Wireless Mode to see the number of wireless clients connected for each wireless mode.

Wireless Clients per Wireless Mode - Current

Displays the number of currently connected wireless clients for each wireless mode:

802.11ac/n/g/b/a.

Wireless Clients per Wireless Mode - Last 24 Hours

Displays the average number of connected wireless clients per hour over the last 24 hours for

each wireless mode: 802.11ac/n/g/b/a.

Note that wireless mode 802.11n includes clients in both the 2.4 GHz and 5 GHz bands.

Signal Quality

Select Signal Quality to see the signal-to-noise ratio (SNR) for connected wireless clients.

Wireless Clients per Signal Quality - Current

Displays the number of currently connected wireless clients according to their SNR. The

categories are defined as follows:

• Excellent: 41 dB and higher

• Good: 26 to 40 dB

Wireless clients tab 27