MSM7xx Controllers Configuration Guide v6.4.0
• Low: 16 to 25 dB
• Very Low: 15 dB and lower
Wireless Clients per Signal Quality - Last 24 Hours
Displays the average number of connected wireless clients according to their signal quality
per hour over the last 24 hours.
Access Points per Number of Wireless Clients - Current
Displays the number of access points that have currently connected wireless clients in one of three
ranges: <10, 10 – 50, and >50.
Access points with Most Wireless Clients - Current
Displays the ten access points with the highest number of currently connected wireless clients over
the last 24 hours. Select an access point name in the chart for more information.
Wireless Clients with the Lowest Signal Quality - Current
Displays the ten currently connected wireless clients with the lowest SNR value.
Note: If the wireless client name is not known, its MAC address is displayed instead.
Select the name or MAC address to see more detailed information about the client.
Association Success Ratio - Last 24 Hours
Displays the association success ratio during the last 24 hours as a percentage, calculated by
comparing successful associations to all attempted associations by wireless clients.
• Requested: Total number of wireless association requests during the last 24 hours.
• Successful: Total number of successful wireless association requests during the last 24 hours.
• Failed: Total number of failed wireless association requests during the last 24 hours.
Association Requests - Last 24 Hours
Displays the number of successful and failed wireless association requests for each hour during
the last 24 hours.
Access Points tab
Provides information about all controlled APs. For example:
28 Dashboard










