MSM7xx Controllers Configuration Guide v6.4.0

Mobility client event log
This page lists all events for a roaming client.
Date and time
Date and time that the even occurred.
Category
Always set to Mobility.
Operation
Possible values are:
• Client tunneling: Client tunneling events indicate activities related to establishing the data
tunnel to a remote controller or AP for the purposes of transporting client data to its home
network.
• Mobility setup: Mobility setup events indicate activities related to the detection and status
of mobile clients, such as association, de-association, and state changes.
Status
Possible values are:
• Client Unicast Tunneling On: The unicast tunneling path to the indicated device (AP or
another controller) has been established.
• Client Broadcast Tunneling On: The multicast/broadcast tunneling path to the indicated
device (either AP or another controller) has been established.
• Client Unicast Tunneling Off: The unicast tunneling path to the indicated device (either AP
or another controller) has been removed. This is normally done only when the client has
disassociated or its home network has changed.
• Client Broadcast Tunneling Off: The multicast/broadcast tunneling path to the indicated
device (either AP or another controller) has been removed. This is normally done only
when the client has disassociated or its home network has changed.
• Mobile Client Connected from Local Network: The tunneling path for data sent from the
wireless client has been established.
• Mobile Client Connected to Home Network: The tunneling path at the clients home network
egress point has been established.
298 Mobility traffic manager