MSM7xx Controllers Configuration Guide v6.4.0
Controller 2 configuration
Mobility domain
1. Select Controller >> Management > Device discovery.
(For a complete screenshot of this page, see “Defining the mobility domain” (page 291).)
• Select Mobility controller discovery.
• Clear This is the primary mobility controller.
• Specify the IP address of the primary mobility controller. In this example: 192.168.10.1.
2. Select Save.
VSC
VSC configuration is the same as for controller 1.
Network profiles
1. Select Controller >> Network > Network profiles.
2. Select LAN port network.
3. Under Settings, change Name to Net2.
4. Select Save.
Scenario 4: Assigning home networks on a per-user basis 315