MSM7xx Controllers Configuration Guide v6.4.0

The following diagram provides a logical overview of the setup. (Only two APs are shown for
clarity).
W
L
A
N
1
User A
Home network via
RADIUS = Net1
W
L
A
N
User B
Home network via
RADIUS = Net2
DHCP server
RADIUS server
192.168.5.1/24
1
Primary
mobility
controller
VLAN switch
Network 2
VLAN 20
NOC
VLAN 1
APs
2
Network 1
VLAN 10
Network 3
VLAN 30
VLAN 2
LAN port
192.168.5.2/24
LAN port
192.168.5.3/24
2
Wireless clients receive their DHCP address from the DHCP server on the network.
A single VSC is used. It is configured with the Mobility traffic manager option enabled. Home
networks for users are determined by setting RADIUS VLAN attributes, which map users to the
following network profiles:
Assigned to VLAN IDAssigned to LAN port onNetwork profile name
10Controller 1Net1
20Controller 2Net2
30Controller 2Net3
1Controller 1NOC
Since all traffic is routed to the VLANs through the LAN port on either controller 1 or 2, no home
networks are assigned on the APs.
Scenario 5: Traffic routing using VLANs 317