MSM7xx Controllers Configuration Guide v6.4.0

VSC
1. Select Controller >> VSCs > HP.
• Under Global, disable Access control.
(For complete screenshot see “VSC configuration options” (page 113).)
• Select Wireless mobility, then under it:
• Select Mobility traffic manager.
• Select Block user.
(For a complete screenshot of this page, see “VSC configuration options” (page 113).)
2. Select Save.
Network profiles
1. Select Controller >> Network > Network profiles.
2. Select Add New Profile.
• Under Settings, set Name to Net1.
• Select VLAN ID and set a value of 10.
3. Select Save.
Scenario 5: Traffic routing using VLANs 319