MSM7xx Controllers Configuration Guide v6.4.0

4. Repeat steps 2 and 3 to define the following profiles:
• Profile name = NOC, VLAN ID = 1
• Profile name = APs, VLAN ID = 2
5. When done, the list of network profiles should look like this:
VLANs
1. Select Controller >> Network > VLANs.
2. Select APs, Net1, and NOC. For Select the action to apply to the selected network profiles,
select Add New Mapping, then select Apply. The Add/Edit VLAN mapping page opens
3. Under Map to, set Port to LAN port.
320 Mobility traffic manager