MSM7xx Controllers Configuration Guide v6.4.0

• Under Settings, set Name to Net2.
• Select VLAN ID and set a value of 20.
3. Select Save.
4. Repeat steps 2 and 3 to define the following profiles:
• Profile name = Net3, VLAN ID = 30
• Profile name = APs, VLAN ID = 2
5. When done, the list of network profiles should look like this:
VLANs
1. Select Controller >> Network > VLANs.
2. Select APs, Net1, and NOC. For Select the action to apply to the selected network profiles,
select Add New Mapping, then select Apply. The Add/Edit VLAN mapping page opens
322 Mobility traffic manager