MSM7xx Controllers Configuration Guide v6.4.0

in the same manner. Rather than manually assigning APs and/or groups of users to specific VLANs,
MTM can be configured to automatically disperse traffic across a VLAN range. In fact, by defining
multiple network profiles, traffic can be mapped to several different ranges, allowing groups of
users or APs to be mapped to specific VLAN ranges.
The following diagram provides a logical overview of the setup. (Only two APs are shown for
clarity).
DHCP server
RADIUS server
192.168.5.1/24
W
L
A
N
User A
W
L
A
N
User B
VLAN switch
APs
Corporate network
VLANs 10-50
VLAN 2
1
Primary
mobility
controller
2
LAN port
192.168.5.2/24
LAN port
192.168.5.3/24
NOC
VLAN 1
1 2
Wireless clients receive their DHCP address from the DHCP server on the network.
A single VSC is used. It is configured with the It is configured with the Wireless mobility, Mobility
traffic manager option enabled. The home network for users is defined by setting the Egress network
when the VSC is bound to the APs. The Egress network is mapped to a network profile that defines
a range of VLANs on the LAN port on the controller.
Assigned to VLAN rangeAssigned to LAN port onNetwork profile name
10-30Controller 1Net1
31-50Controller 2Net2
324 Mobility traffic manager