MSM7xx Controllers Configuration Guide v6.4.0

• Under Map to, set Port to LAN port.
3. Select Save.
AP configuration
Split the APs into two groups as explained in “Working with groups” (page 164). Call them Group
1 and Group 2.
VSC binding for Group 1
1. Select Controller > Controlled APs > Group 1 >> VSC bindings and then select HP. The VSC
binding page appears.
• Set VSC profile to HP.
• Select Egress network, then for Network profile, select Net1 (10–30).
2. Select Save.
Scenario 6: Distributing traffic using VLAN ranges 329