MSM7xx Controllers Configuration Guide v6.4.0

To define a new network profile
1. Select Controller >> Network > Network profiles.
On the MSM720
On all other controllers
2. Select Add New Profile.
3. Configure profile settings as follows:
• Under Settings, specify a Name for the profile.
• To assign a VLAN, select VLAN ID and then specify a number.
If needed, you can also define a range of VLANs. This enables a single VLAN definition to
span a large number of contiguously assigned VLANs. Specify the range in the form X-Y,
where X and Y can be 1 to 4094. For example: 50-60.
An IP address cannot be assigned to a VLAN range.
You can define more than one VLAN range by using multiple profiles. Each range must be
distinct and contiguous.
4. Select Save.
Configuring IP interfaces
The IP interfaces page lists all network profiles to which an IPv4 address is assigned. To open the
IP interfaces page, select Controller >> Network > IP interfaces.
On the MSM720
On all other controllers
Configuring IP interfaces 33