MSM7xx Controllers Configuration Guide v6.4.0

VSC binding for Group 2
1. Select Controller > Controlled APs > Group 2 >> VSC bindings and then select HP. The VSC
binding page appears.
• Set VSC profile, to HP.
• Select Egress network, then for Network profile, select Net2 (31-50).
2. Select Save.
Subnet-based mobility
This feature has been deprecated.
If you are creating a new installation, use Mobility Traffic Manager. If you are upgrading from a
previous release, your subnet-based configuration will still work. However, for added benefits and
greater flexibility you should migrate your setup to Mobility Traffic Manager.
For reference, subnet-based mobility configuration options appear on the following pages:
• Controller > Controlled APs >> Configuration > Local networks
• Controller > Controlled APs > [group] >> Configuration > Local networks
• Controller > Controlled APs > [AP] >> Configuration > Local networks
• Controller > VSCs >> [VSC-name]
330 Mobility traffic manager