MSM7xx Controllers Configuration Guide v6.4.0

The following interfaces are created by default. They can be edited, but not deleted.
On the MSM720
• Access network is assigned to VLAN 1 and is mapped to ports 1, 2, 3, and 4, untagged. (On
an untagged port, the VLAN is only used internally to route/switch traffic.)
• Internet network is assigned to VLAN 10 and is mapped to ports 5 and 6, untagged. (On an
untagged port, the VLAN is only used internally to route/switch traffic.)
On all other controllers
• LAN port is assigned to the LAN port untagged.
• Internet port is assigned to the Internet port untagged.
To assign an IP address to a new interface on the MSM720
Any network profile that has a VLAN ID and is mapped to a physical port can have an IP address
assigned to it. The following steps illustrate how to create a new profile and assign an IP address
to it.
1. Select Controller >> Network > Network profiles.
2. Select Add New Profile.
3. Specify a name for the profile and assign a VLAN ID to it. This example uses the profile name
Network A and a VLAN ID of 25. Select Save.
4. Select Controller >> Network > VLANs to open the VLANs page.
34 Network configuration