MSM7xx Controllers Configuration Guide v6.4.0

User addressing and related features
The controller provides a number of features related to user addressing, including:
For more information, see ...DescriptionFeature
“Configuring the global DHCP server” (page
45)
Enables the controller to dynamically assign IP
addresses to users.
DHCP server
“Assigning fixed DHCP leases” (page 47)The controller assigns the same IP addresses to
specific users each time they connect.
Fixed leases
“Configuring the DHCP relay agent” (page 48)The controller to users a third-party DHCP server
to dynamically assign IP addresses to users.
DHCP relay
“Network address translation” (page 62)Hides the IP addresses of all users on the
protected network from the public network.
NAT
“To configure the global DHCP relay agent”
(page 48)
Enables a third-party DHCP server to assign an
IP address to users that makes them visible on
the port mapped to a VSC egress.
Extend VSC egress
subnet to VSC
ingress subnet
“VPN one-to-one NAT” (page 515)Assigns a unique IP address to each IPSec or
PPTP VPN connection made by a user to a
remote server via the Internet port.
VPN one-to-one
NAT
“Assigning public IP addresses” (page 47)Assigns an IP address to users that makes them
visible on the controller Internet port.
Public IP address
360 User authentication, accounts, and addressing